Fuel Pump How Do You Bypass A Ford Fuel Pump Relay ?
How do you bypass a Ford fuel pump relay ? - fuel pump
I've doubled an 89 Ford E150 with 5.0 liter engine with direct fuel injection, gas tanks to
it for 5 years.
He now has a launch condition.
The fuel pumps are working, the compression and ignition.
Happen and the jets of gas seems.
It must be bad gas.
I empty the tank of gas in this age
without the tanks.
I want the bridge to the fuel pump relay
for the fuel pump runs continuously, without starting the engine.
So I can when disconnecting the fuel line and the
Pumping water into cubes.
My question is
How do I close the relay?
Where is the relay and it seems?
What are the points mounted in the other?
Thanks
|
3 comments:
Under the hood on the passenger side, clinging to firewalls
The color of the son are Orange w / Lite Blue, Yellow, Red, Tan w / green. (Sun 4)
With the key, the bridge of the orange / blue wire with yellow.
(The yellow one is going orange hot in the pit.)
The relay pump son was probably 4 in the terminal 2 of the control circuit and 2 to the power of the pump. (It's a pattern on the side of the relay.) The control circuit provides a grounding cable and a cable that has power only begin when you turn the key.
The pump circuit 2 cable, power supply and "hot" all the time and initiative of the pump. Attach a bridge between the driver and the cable from the pump.
If this is not the configuration of contempt. BTW, the disadvantage of using the pump (s) can collect water and waste pollutants in reservoirs to the pump (s), fuel filter, lines and bars. You can rethink and find a drain plug at the bottom of each tank.
No guarantee, but try to run a hot wire to the fuse for the fuel pump.
Post a Comment